RLD™ Jackshaft Operator

Features

Easy push to set limits

UL 325 Listed

Automatic open and close door force settings

Open/Close/Stop control station

Programmable mid-stop

Time-to-close can be set at pre-defined values between 0 seconds and 5 minutes

Pull cord release for emergency manual operation.

2-year limited warranty

Commercial photocells

7.5 in/sec door speed in both directions in most applications

Operational on doors up to 14 ft. tall with up to 84” of high lift, 18 ft. wide, 180 sq ft., and 850 lbs

Product Literature

RLD Jackshaft Door Operator Brochure 

Construction

Mounting: Able to be a wall-mounted direct couple on sectional doors.

Advanced radio receiver system with auto-seek frequency range: This system quickly and easily learns up to 250 CodeDodger^® transmitters and automatically cycles between 315 and 390 frequencies.

Easy limit setting: An easy-to-set limit sensor that makes it easy to set and maintain limits.

Standard commercial features: Mid-stop, O/C/S push button station, timer-to-close, commercial photo eyes.

Optional accessories can be added at any time: OHDAnywhere^®, light kit, door lock, and battery backup.

UL 325 Listed: Requires the addition of monitored external entrapment devices before the operator working in momentary contact in the close direction.

​​RLD Jackshaft Advantages

• CodeDodger^® 315/390 MHz receiver can store up to 255 standard and/or open/close/stop transmitters.
• Soft start and stop reduce stress on the door and operator for improved life
• Safe-T-Pulse^® – Internal cable slack detection eliminates external cable monitoring devices and reverses door travel when cable tension isn’t detected for safety
• The operator force profile detects irregularities in door operation to identify unsafe operation. The force profile is updated every cycle to account for changes in weather and temperature.
• Precision-sealed roller bearings on the output shaft for improved power transfer
• Interlock circuit with pre-installed jumper
• The output shaft coupler utilizes six set screws with a thread locker to reduce shaft slippage and screw backouts.
• Output shaft coupler can be used on 1” hollow or solid door shafts with 1/4” keyway.
• The optional LED work light may be toggled via the stop button on the Open/Close/Stop control station when the door is inactive.
• A small operator profile of 12” in length by 6.9” in width allows for use in tight applications. It requires only 2.5” of headroom clearance and 7” of side room clearance.